| SC-7217A | SC-7215A |
CH-A | Input impedance | 50Ω ±1.5% / 1MΩ± 1.5% 16pF ±3pFSC-7215 |
CH-B | Input withstand voltage | 50Ω/ 1MΩ | 7Vrms / 200Vpk |
| Frequency bandwidth | DC / AC | DC ~ 450MHz / 10Hz ~ 450MHz |
| Input withstand voltage | ATT OFF / ON | ±2.5V / ±50V |
| Trigger level accuracy | ATT OFF / ON | ±2%±25mV / ±2.5%±500mV |
| Slope switching/bandwidth restriction/noise elimination | +/- / 10kHz / OFF/ON |
EXT-B | Input signal range | Pulse width/frequency | 500ns min / 1MHz max |
CH-C | Input impedance/SWR/maximum input power | 50Ω AC-coupling/2.0 or less/+30dBm | - |
Frequency bandwidth | 100MHz ~ 3GHz |
AGC | ON/OFF |
Burst detection | ON/OFF |
| Detection sensitivity/burst detection delay time | ~ 1.2GHz: -20dBm, ~ 3GHz : -10dBm / 10 |
Measurement function | FREQ A, FREQ B | Up to 12 digits (at 1 second gate) |
| Measurement range | At single: 6mHz ~ 250MHz,Time/at EXT-B gate: 12mHz ~ |
450MHz |
(However, the synchronization of the measured signal must be less than or equal to ⅓ of the gate time) |
Gate selection | Single/EXT-B/time |
FREQ C | Up to 12 digits (at 1 second gate) | - |
| Measurement range/gate selection | 100MHz to 3GHz 1/16 prescaler/EXT-B/time |
FREQ LINE | Measurement range/gate selection | 45Hz to 440Hz/time |
PERIOD A | Measurement range | Single/time | At single: 4ns to 166s (synchronization of the measured signal must be less than or equal to ⅓ of the gate time) |
Gate selection | Time/at EXT-B gate: 2.2ns ~ 83s |
DUTY A | Input signal range | Pulse width/frequency | 6ns min / 80MHz max |
Measurement range | Single/time | 0.01μ~ 99.999,999,99% / 0.2μ ~ 99.999,999,8% |
Gate selection | Single/time |
PULSE WIDTH A | Input signal range | Pulse width/frequency | 6ns min / 80MHz max |
Measurement range | Single/time | 6ns to 171s/6ns to approx. 1/2 gate time |
Gate selection | Single/time |
TIME INTERVAL A→B | Input signal range | Pulse width/frequency | 6ns min / 80MHz max |
Measurement range | Single/time | 6ns to 10,995s/6ns to approx. 1/2 gate time |
Gate selection | Single/time |
FREQ A/B | Input signal range frequency | 250MHz max |
Measurement range/gate selection | 1E-9 to 1E +9/time |
PHAS A→B | Input signal range | Pulse width/frequency | 6ns min / 80MHz max |
Measurement range | Single/time | 0.1μ ~ 359.999,999,9°/ 1μ ~ 359.999,999° |
(However, the period of the measured signal must be less than or equal to 1/2 of the gate) |
Gate selection | Single/time |
TOT A | Input signal range | Pulse width/frequency | 2ns min / 250MHz max |
Gate selection/measurement range | ANUAL/EXT-B/time/0 to 4,294,967,295 count |
Peak voltage measurement | Measurement frequency/Measurement speed | 150Hz to 150MHz/2 seconds or less |
Measurement voltage range | ATT OFF / ATT | ±2.5V / ±50V |
ON |
Time gate | Setting range | 10μs ~ 10s |
Setting resolution | 10μs ~ 990μs: 10μs, 0.1ms ~ 9.9ms: 0.1ms, 1ms ~ 99ms: 1ms, 10ms ~ 990ms: 10ms, 0.1s ~ 10s: 0.1s |
However, the setting range of FREQ LINE is from 0.1s to 10s. |
Measurement action/operation | Repeat/single/HOLD/smoothing (moving average), scaling, comparator, statistics (MAX, MIN, σ, average) |
Panel setup/data storage | Internal memory (10) or USB memory (option)/up to 500,000 (volatile memory) |
Internal reference clock | Temperature characteristics | ±1 ppm (range of 0 to +40°C with +25°C as reference) |
Changes over time/short-term stability | ±0.1ppm/month, ±1ppm/year /±1ppb/s |
Interface | USB / LAN / DIO | USB2.0 HS/100base-TX/Output: HI/LO/GO/BUSY |
10MHz STD IN | Input impedance/input frequency/input sensitivity | Approx. 850Ω (at 10MHz) AC coupling/10MHz ±50Hz/100mVrms |
Marker/STD output | STD/marker is selected and output according to the setting |
| Output impedance/marker output/STD output | 50Ω ±10%/+1Vo-p (0V output when measuring p)/10MHz sine wave 1Vp-p or more (50Ω when terminated) |
Option | CH-A/CH-B rear input | SC-709 | - | When you want to input signals from the rear, such as when you mount this product on the rack, change the CH-A/B input terminal to the rear. |
(Factory delivery OP) | (SC-7215A only) |
| CH-A/CH-B/CH-C rear input | SC-710 | When you want to input signals from the rear, such as when you mount this product on the rack, change the CH-A/B/C input terminal to the rear. | - |
| (SC-7217A only) |
| GPIB interface | SC-711 | The connection terminal of the GPIB interface. |
| It can be connected to a PC, etc. and can be remotely controlled from the outside. |
| USB host | SC-713 | The terminal for USB memory connection. |
| (For memory connection) |
| Interface |
| |
| RS-232 interface | SC-714 | The connection terminal of the RS-232 interface. |
| OCXO | SC-715 | Temperature characteristics | ±20 ppb (range of 0 to +40°C with +25°C as reference) |
| (High-stability clock) | Change over time | 100 ppb/year (one year frequency change based on the frequency 10 days after power-on). At +25°C) |
| | SC-716 | Temperature characteristics | ±5 ppb (range of 0 to +40°C with +25°C as reference) |
| | Change over time | ±0.5 ppb/day (one day frequency change based on the frequency 30 days after power-on). At +25°C) |
| | ±50 ppb/year (one year frequency change based on the frequency 30 days after power-on). At +25°C) |
| Interface | GPIB IEEE 488-1 compliant, RS-232 with full remote function, host for USB memory device connection (not remote interface) |
Power supply | Voltage, frequency | 100V ~ 240V ±10% / 50 ~ 60Hz±5%(100V ~ 240V) / 400Hz±10%(100V ~ 120V) |
Power consumption | 70VA(35W) max |
External dimensions/mass | Approx. 210W × 99H × 353D mm/Approx. 3kg |
Accessories | Product user’s guide, manual (CD), power cord |
Environmental | 0°C to +40°C 80%RH or less no condensation |