Liên hệ
Dung lượng lớn, khả năng cập nhật dạng sóng tốc độ cao 50.000 dạng sóng/giây và màn hình hiển thị 256 cấp độ cho phép quan sát rõ ràng các hiện tượng xảy ra không thường xuyên.
Hiển thị và phân tích các loại sóng được thu thập
| Type | title | Rating |
|---|---|---|
| Vertical | Vertical Sensitivity Resolution | 8 bit :1mV~10V/div |
| Input Coupling | AC, DC, GND | |
| Input Impedance | 1MΩ// 16pF approx. | |
| DC Gain Accuracy | ±3% full sacle；2mV/div～10V/div ±4% full scale；1mV/div | |
| Polarity | Normal & Invert | |
| Offset Position Range | 1mV/div : ±1.25V 2mV/div ~ 100mV/div : ±2.5V 200mV/div ~ 10V/div : ±125V | |
| Waveform Signal Process | Plus, -, ×, ÷, FFT, FFTrms, User Defined Expression FFT: Spectral magnitude. Set FFT Vertical Scale to Linear RMS or dBV RMS, and FFT Window to Rectangular, Hamming, Hanning, or Blackman-Harris | |
| Trigger | Source | CH1, CH2, CH3*, CH4*, Line, EXT** *four channel models only. **two channel models only. |
| Trigger Mode | Auto (supports Roll Mode for 100 ms/div and slower), Normal, Single Sequence | |
| Trigger Type | Edge, Pulse Width, Video, Pulse Runt, Rise & Fall,Timeout, Alternate, Event-Delay(1~65535 events),Time-Delay(Duration, 4nS~10S), Bus | |
| Holdoff range | 4ns to 10s | |
| Coupling | AC, DC, LF rej., Hf rej., Noise rej. | |
| Sensitivity | 1div | |
| External Trigger (two channel models only) | Range | ±2.5V |
| Sensitivity | DC ~ 100MHz Approx. 100mV 100MHz ~ 200MHz Approx. 150mV | |
| Input Impedance | 1MΩ±3%~16pF | |
| Horizontal | Time base Range | 5ns/div ~ 100s/div (1-2-5 increments) |
| ROLL: | 100ms/div ~ 100s/div | |
| Pre-trigger | 10 div maximum | |
| Post-trigger | 2,000,000 div maximum | |
| Timebase Accuracy | ±50 ppm over any ≥ 1 ms time interval | |
| Real Time Sample Rate | 1GSa/s max. | |
| Record Length | Max. 10Mpts | |
| Acquisition Mode | Normal, Average, Peak Detect, Single | |
| Peak Detection | 2ns (typical) | |
| Average | selectable from 2 to 256 | |
| X-Y Mode | X-Axis Input | Channel 1; Channel 3* *four channel models only |
| Y-Axis Input | Channel 2; Channel 4* *four channel models only | |
| Phase Shift | ±3° at 100kHz | |
| Cursors and Measurement | Cursors | Amplitude, Time, Gating available; Unit:Seconds(s), Hz(1/s), Phase(degree), Ration(%) |
| Automatic Measurement | 36 sets: Pk-Pk, Max, Min, Amplitude, High, Low,Mean, Cycle Mean, RMS, Cycle RMS, Area, CycleArea, ROVShoot, FOVShoot, RPREShoot,FPREShoot, Frequency, Period, RiseTime, FallTime,+Width, -Width, Duty Cycle, +Pulses, -Pulses,+Edges, -Edges, FRR, FRF, FFR, FFF, LRR, LRF,LFR, LFF, Phase | |
| Cursors measurement | Voltage difference between cursors ( ΔV) Time difference between cursors ( ΔT) | |
| Auto counter | 6 digits, range from 2Hz minimum to the rated bandwidth | |
| Control Panel Function | Autoset | Single-button, automatic setup of all channels forvertical, horizontal and trigger systems, with undo Autoset |
| Save Setup | 20set | |
| Save Waveform | 24set | |
| Display | TFT LCD Type | 7″ TFT WVGA color display |
| Display Resolution | 800 horizontal × 480 vertical pixels (WVGA) | |
| Interpolation | Sin(x)/x | |
| Waveform Display | Dots, vectors, variable persistence (16ms~4s),infinite persistence | |
| Waveform Update Rate | 50,000 waveforms per second, maximum | |
| Display Graticule | 8 x 10 divisions | |
| Display Mode | YT, XY | |
| Interface | USB Port | USB 2.0 High-speed host port X1, USB 2.0 High-speed device port X1 |
| Ethernet Port(LAN) | RJ-45 connector, 10/100Mbps Auto-MDIX (Only for 4 channel Models.) | |
| Go-NoGo BNC | 5V Max/10mA TTL open collector output | |
| Kensington Style Lock | Rear-panel security slot connects to standard Kensington-style lock | |
| Miscellaneous | Multi-language menu | Available |
| Operation Environment | Temperature: 0°C to 50°C. Relative Humidity ≤80% at 40°C or below; ≤ 45% at 41°C ~ 50°C | |
| Dimensions | 380mmX208mmX127.3mm | |
| Weight | 2.8kg |
